Forum Title: Roller won't stay in the track
The hinge is very often jumping out of the hole on the sliding kitchen door. Is it different types of hinges
Category: Windows & Doors Post By: WANDA FOSTER (Council Bluffs, IA), 01/27/2019

Window Screen Hardware

- EVERETT CORTEZ (Walnut Creek, CA), 02/09/2019

What does the angle of the hinge side look like? Is it angled downward with the top wider gapped than the bottom? If so, a correction of that angle will help keep this roller where it should be.

- HAROLD MITCHELL (Sierra Vista, AZ), 02/14/2019

As Larry mentioned, check the door to see how plumb it is when it is closed. Make the door hang just as straight as the jamb is, either by moving the bottom pivot to the left, or the top pivot to the right. Either of those adjustments will raise the leading edge roller slightly. You can also turn the bottom pivot and make it longer to raise the door, which might also help some.

- CARLOS REYES (Sterling Heights, MI), 02/11/2019

Homeowner Resources & Services

requestaquote Get Free Quotes callnow 888-506-9527